When there is a problem with anything, the boar trap is no exception, but what causes the problem with the boar trap. How to avoid problems when using it? Today we will introduce the precautions for using the boar trap. And how to get stuck when using a boar trap.
1. Before using the wild boar equipment, power on the equipment once. If a noise is heard, there is a loosening problem in the capacitor welding area. In this way, the welding is completed and there is no problem. Stop the power supply.
2. Be sure to turn off the device before collecting the captured prey, and discharge the remaining power in the device before collecting the prey.
3. When you finish using the boar catching equipment, be sure to discharge the electricity in the equipment toward the ground. Do not discharge in the place where the high-voltage network cable and the ground cable are in contact, in order to prevent the machine damage.
When using a wild boar machine, do not stay on the main line of the wild boar host where the wild boar passes, and deviate slightly to prevent being caught by the wild boar. If the environment is more complicated, you need to simulate the scene in your mind, guess the position where the wild boar appears, and remove the weeds that block the line of sight in the direction that the wild boar may be in, leaving a good line of sight. Can increase the chance of success.
The above are the matters needing attention when using the boar machine and how to lock the boar.